June 10th, 2014

Enhancing Catastrophe Modeling In the Middle East and North Africa

Posted at 1:00 AM ET

GC Editor

victoria-jenkinsVictoria Jenkins, Managing Director


The Middle East and North Africa (MENA) region is acknowledged to be a key growth area for (re)insurance. Insurance penetration is rapidly increasing but still has some way to go to reach comparable levels with Europe or the United States. In the period 2003-2012, most countries in the region achieved triple-digit percentage increases in premium volume, with some exceeding 600 percent growth (source: Swiss Re Sigma).

It is quite normal by historical standards for investment in catastrophe risk quantification to lag insurance growth considerably. Building robust catastrophe models can be expensive and to make the investment commercially viable, the premium volume has to reach a critical mass.

The first available models for selected countries in the region appeared in the late 1990s. There has been a gradual expansion in coverage since this time, largely focused on earthquake and wind perils. The table below shows the current position in terms of the model availability from the three main vendor modeling companies, with an “x” designating no model provided by that vendor.


Rising Catastrophe Losses

In contrast to the comparative lack of investment in models, the risk from natural catastrophe losses appears to be increasing. With rapid urbanization, population growth and economic development compounded by climate change, catastrophe losses are on the rise around the world. This is particularly observable in the MENA region, where the average number of natural disasters has tripled since the 1980s, according to a study by the World Bank.

Floods have been the most recurrent hazard in MENA. Flash floods triggered by heavy rainfall on dry, drought prone land are a specific problem and can be disastrous. The 2008 flooding over the eastern governorates of Yemen, Hadramount and Al-Mahara resulted in an economic loss of YER327,551 million (USD1.5 billion), equivalent to 6 percent of Yemen’s GDP, according to the Global Facility for Disaster Reduction and Recovery.

Earthquakes are the second most prevalent hazard in the region, with almost all cities located in an area of seismic risk. The region sits at the junction of the Arabian, African and Eurasian plates, resulting in high tectonic activity.

Factor-Based Methods

The risk is real and the availability of models is patchy, so how are companies typically factoring catastrophe risk into their risk management processes? Models are used for rating agency, internal control purposes and to some extent, for reinsurance structuring and pricing. There is still a wide use of exposure-based methods in practice, for example, considering a percentage of country- or city-wide total sums insured to control accumulations and to calculate the amount of catastrophe limit to purchase. These factor-based methods can produce a useful cross-check against model results but can also produce much larger probable maximum loss numbers than the models themselves. This has led to reinsurers putting pressure on the size of the event limits offered in some areas.

 MENA Visuals

Data Entered Into Models

Before we consider the quality of available models for the region we need to focus on the accuracy, completeness and appropriateness of the data that can be entered into them.

For catastrophe loss modeling to be accurate, knowing the location and the value of the risk is vitally important. This is the most basic information the model needs, but even this level of detail is not always available. Country-level total sums insured can often be the only data provided and so a method to disaggregate this information to a more localized level is required. Such techniques will use metrics like population density to inform the disaggregation. Companies should aim to understand the uncertainties that surround a lack of location-based knowledge and the implications for their risk profile. This can be achieved through sensitivity testing the hazard assumptions within the models by geographic location.

Catastrophe models can process much more information than just value and location. Additional detail on the occupancy or construction type of a risk can also be influential on the level of loss. It is also vitally important to capture good information in respect of policy terms and facultative protection to make sure an accurate financial perspective is produced. Using catastrophe models without good original information can lead to misleading results and suboptimal decisions, so investing in data improvements is a wise investment and is likely to pay dividends in terms of understanding the risk, giving a competitive advantage and can reduce loadings reinsurers may impose for data uncertainty.

Testing and Validation

Testing models is not a new activity. Brokers have been active in this space since catastrophe modeling began. Recent regulatory advances across the globe have been a catalyst for a renewed focus on model validation. It is no longer acceptable in certain regulatory regimes to blindly accept a model vendor’s results without challenge. The use of a specific catastrophe model or a blend of model results requires justification. Justification requires understanding and so the level of model documentation and transparency can be influential here.

At Guy Carpenter, we believe in a very structured approach to model validation. All model tests can essentially be categorized into three areas, sensitivity testing, loss validation and scientific appraisal. Sensitivity testing measures how the model’s output changes with changes to the data inputs. This can be illuminating in terms of understanding how the model works, identifying any anomalies and also in prioritizing any data improvement exercises. Loss validation tests how well the model reproduces historic losses where data is available. Scientific appraisal considers the underlying scientific assumptions of the model and where possible compares with independent data or academic studies.

The test results can be used for many things. You can justify the choice of one model over another based on performance against the tests. Deficiencies in a model can be highlighted and adjustments made to compensate for them. Where multiple models are available, the test results can suggest suitable blending weights.

This testing process works when there are models actually available to test, but what about territories and perils where there is no available model? How do we quantify a non modeled peril? The Association of British Insurers in the United Kingdom recently published a very useful report on this topic outlining many helpful techniques.

One useful technique can involve what we call “model transportation,” using a well-accepted model from one territory and peril as a proxy for modeling the same peril in another part of the world. Taking earthquake as an example, this can involve using the available seismic data for the region in question and finding similar events in the stochastic catalogues of the vendor models and applying these, with some necessary modifications, to the new territory.

Improvements Likely as Industry Matures

As we have seen, there are ways to improve risk quantification and reduce uncertainty in catastrophe modeling for the MENA region, and further advancements are likely as the insurance industry grows. The recent developments in catastrophe modeling platforms will lead to better understanding of the risks, allowing better transparency and more control over the model levers. The existence of open source modeling platforms such as OASIS could stimulate a more comprehensive and global perspective on model building by attracting more local and specialist academic input into hazard quantification, not just for insurance purposes, but also for disaster mitigation reasons.

The existing circumstances present a healthy challenge to accurately quantify catastrophe risk in the MENA region but I think the future is bright and improvements will be forthcoming as industry techniques mature. 

This article first appeared in the June 2014 edition of Middle East Insurance Review.

Click here to register to receive e-mail updates>>

Guy Carpenter & Company, LLC Terms and Conditions of Use


By continuing to access or use this site, or any service on this site, you signify your acceptance of the TERMS. From time to time, Guy Carpenter & Company, LLC (“Guy Carpenter”) may modify the TERMS. Accordingly, please continue to review the TERMS whenever accessing or using this site. Your use of this site, or any service on the site, after the posting of modifications to the TERMS will constitute your acceptance of the TERMS, as modified. If, at any time, you do not wish to accept the TERMS, you may not use the site. Any terms or conditions proposed by you that are in addition to or which conflict with the TERMS are expressly rejected by Guy Carpenter and shall be of no force or effect.

1. User Assent to Terms and Conditions of Service

You represent that you have read and agree to be bound by the TERMS for GCCapitalIdeas.com. You further agree: (i) to comply with U.S. law regarding the transmission of any data obtained from the Service (as defined herein) in accordance with the TERMS; (ii) not to use the Service for illegal purposes; and (iii) not to interfere or disrupt networks connected to the Service.

2. Disclaimer

All content provided on this Web site is based upon information which we believe to be reliable and should be understood to be general insurance information only. It is not intended to be taken as advice with respect to any individual situation and cannot be relied upon as such. Consult your reinsurance/insurance advisors with respect to individual coverage issues.

Guy Carpenter makes no representations or warranties, express or implied, with respect to the accuracy or reliability of the content contained on this Web site. Readers are cautioned not to place undue reliance on any historical, current or forward-looking statements. Guy Carpenter undertakes no obligation to update or revise publicly any historical, current or forward-looking statements, whether as a result of new information, research, future events or otherwise.

Statements concerning, tax, accounting, legal or regulatory matters should be understood to be general observations based solely on our experience as reinsurance brokers and risk consultants, and may not be relied upon as tax, accounting, legal or regulatory advice which we are not authorized to provide. All such matters should be reviewed with your own qualified advisors in these areas.

3. Intellectual Property

This Web site, including, but not limited to, text, content, photographs, video, audio, and graphics (the “Service”), is protected by copyrights, trademarks, service marks, international treaties and/or other proprietary rights and laws of the U.S. and other countries. The Service is also protected as a collective work or compilation under U.S. copyright and other laws and treaties. All individual articles, columns and other elements making up the Service are also copyrighted works. You agree to abide by all applicable copyright and other laws, as well as any additional copyright notices or restrictions contained in the Service.

4. Restrictions on Use

You may not use the Service for any illegal purpose or in any manner inconsistent with the TERMS. You agree to use the Service solely for the use and benefit of your own organization, and not for resale or other transfer to, or use by or for the benefit of, any other person or entity. You agree not to use, transfer, distribute or dispose of any information contained in the Service in any manner that could compete with the business of Guy Carpenter. You acknowledge that the Service has been developed, compiled, prepared, revised, selected and arranged by Guy Carpenter and others (including certain other information sources) through the application of methods and standards of judgment developed and applied through the expenditure of substantial time, effort and money and constitutes valuable intellectual property and trade secrets of Guy Carpenter and such others. You agree to protect the proprietary rights of Guy Carpenter and all others having rights in the Service during and after the term of this agreement and to comply with all reasonable written requests made by Guy Carpenter or its suppliers of content, equipment or otherwise (“Suppliers”) to protect their and others’ contractual, statutory and common law rights in the Service. You agree to notify Guy Carpenter in writing promptly upon becoming aware of any unauthorized access or use of the Service by any party or of any claim that the Service infringes upon any copyright, trademark or other contractual, statutory or common law rights.

5. Further Restrictions on Use

You may not copy, reproduce, recompile, decompile, disassemble, reverse engineer, distribute, publish, display, perform, modify, upload to, create derivative works from, transmit or in any way exploit any part of the Service, except that you may download material from the Service and/or make print copies for use within your organization, provided that all copies retain all copyright and other proprietary notices. The analysis and presentation included in the Service may not be recirculated, redistributed or published by you without Guy Carpenter’s prior written consent. Modification of the Service’s content would be a violation of Guy Carpenter’s copyright and other proprietary rights. Additionally, you may not offer any part of the Service for sale or distribute it over any other medium including but not limited to over-the-air television or radio broadcast, a computer network or hyperlink framing on the internet without the prior written consent of Guy Carpenter. The Service and the information contained therein may not be used to construct a database of any kind. Nor may the Service be stored (in its entirety or in any part) in databases for access by you or any third party or to distribute any database services containing all or part of the Service. You may not use the Service in any way to improve the quality of any data sold or contributed by you to any third party. Furthermore, you may not use any of Guy Carpenter’s names or marks in any manner that creates the impression such names or marks belong to or are associated with you or imply any endorsement by Guy Carpenter, and you acknowledge that you have no ownership rights in and to any of these names or marks. You will not use the Service, the information contained therein or any of Guy Carpenter’s names or marks in unsolicited mailings or spam material and will not spam or send unsolicited mailings to any person or entity using the Service.

6. License

You acquire no rights or licenses in or to the Service and materials contained therein other than the limited right to utilize the Service in accordance with the TERMS.

7. Rights Reserved

All present and future rights in and to trade secrets, patents, copyrights, trade names, trademarks, service marks, databases, know-how and other proprietary rights of any type under the laws of any governmental authority, domestic or foreign, including rights in and to all applications and registrations relating to the Service (the “IP Rights”) shall, as between you and Guy Carpenter, at all times be and remain the sole and exclusive property of Guy Carpenter. All present and future rights in and title to the Service (including the right to exploit the Service and any portions of the Service over any present or future technology) are reserved to Guy Carpenter.

8. Disclaimer and Limitation of Liability

You agree that your use of the Service is at your sole risk and acknowledge that the Service and anything contained therein, including, but not limited to, content, services, goods or advertisements (the “Items”) are provided “AS IS” and that Guy Carpenter makes no warranty of any kind, express or implied, as to the Items, including, but not limited to, merchantability, noninfringement, title or fitness for a particular purpose or use. Guy Carpenter does not warrant that the Service is compatible with your equipment or is free of errors or viruses, worms or “Trojan horses” and is not liable for any damage you may suffer as a result of such destructive features. You agree that Guy Carpenter, its Suppliers and its third-party agents shall have no responsibility or liability for: (i) any injury or damages, whether caused by the negligence of Guy Carpenter, its employees, subcontractors, agents, Suppliers or otherwise arising in connection with the Service; or (ii) any fault, inaccuracy, omission, delay or any other failure in the Service caused by your computer equipment or arising from your use of the Service on such equipment. The content of other Web sites, services, goods or advertisements that may be linked to the Service is not maintained or controlled by Guy Carpenter. Guy Carpenter is therefore not responsible for the availability, content or accuracy of other Web sites, services or goods that may be linked to, or advertised on, the Service. Guy Carpenter does not: (a) make any warranty, express or implied, with respect to the use of the links provided on, or to, the Service; (b) guarantee the accuracy, completeness, usefulness or adequacy of any other Web sites, services, goods or advertisements that may be linked to the Service; or (c) make any endorsement, express or implied, of any other Web sites, services, goods or advertisements that may be linked to the Service. Guy Carpenter is also not responsible for the reliability or continued availability of the telephone lines and equipment you use to access the Service. You understand that Guy Carpenter and/or third-party contributors to the Service may choose at any time to inhibit or prohibit their content from being accessed under the TERMS.

9. Limitation of Liability


10. Representations and Warranties

You represent, warrant and covenant that you: (i) have the power and authority to enter into this agreement; (ii) are at least eighteen (18) years old; (iii) shall not use any rights granted hereunder for any unlawful purpose; and (iv) shall use the Service only as set forth in these TERMS.

11. Indemnification

You agree, at your own expense, to indemnify, defend and hold harmless Guy Carpenter and its employees, representatives, Suppliers and agents, against any claim, suit, action or other proceeding, to the extent based on or arising in connection with your use of the Service, or any links on the Service, including, but not limited to: (i) your use or someone using your computer’s use of the Service; (ii) a violation of the TERMS by you or anyone using your computer; (iii) a claim that any use of the Service by you or someone using your computer infringes any IP Right (as herein defined) of any third party, or any right of personality or publicity, is libelous or defamatory, or otherwise results in injury or damage to any third party; (iv) any deletions, additions, insertions or alterations to, or any unauthorized use of, the Service by you or someone using your computer; or (v) any misrepresentation or breach of representation, warranty or covenant made by you contained herein. You agree to pay any and all costs, damages and expenses (including reasonable attorneys’ fees) and costs awarded against or incurred by or in connection with or arising from any such claim, suit, action or proceeding.

12. Termination

Either you or Guy Carpenter may terminate this agreement with or without cause at any time and effective immediately. You may terminate by discontinuing use of the Service and destroying all materials obtained from the Service. This agreement will terminate immediately without notice from Guy Carpenter if Guy Carpenter determines, in its sole discretion, that you have failed to comply with any provision of these TERMS. Upon termination by you or upon notice of termination by Guy Carpenter , you must promptly destroy all materials obtained from the Service and any copies thereof. Sections 2, 3, 4, 5, 8, 9, 11, 12, and 13 shall survive any termination of this agreement.

13. Governing Law

These TERMS shall be governed and construed in accordance with the laws of the United States of America and the State of New York, without giving effect to conflicts-of-law principles thereof. You agree to submit to the personal jurisdiction of the state and federal courts located in New York County with respect to any legal proceedings arising out of this agreement and waive any objection to the propriety or convenience of venue in such courts. If any provision of the TERMS is found by a court of competent jurisdiction to be invalid or unenforceable, such provision shall be enforced to the maximum extent permissible and the other provisions of the TERMS shall remain in full force and effect.

14. Access Outside the United States

If you choose to access the Service from outside the United States, you are responsible for compliance with foreign and local laws. Software from the Service may be subject to United States export controls that prohibit downloading, exportation or re-exportation: (i) into (or to a national or resident of) Cuba, Iraq, Libya, Iran, Syria, Sudan, or any other country to which the U.S. has embargoed goods; or (ii) to anyone on the U.S. Treasury Department’s Table of Deny Orders. By using the Service, you represent and warrant that you are not located in, controlled by or a national or resident of any such country or on any such list.

15. Miscellaneous

You acknowledge that Guy Carpenter has the right to change the content or technical specifications of any aspect of the Service at any time at Guy Carpenter’s sole discretion. You further accept that such changes may result in your being unable to access the Service.

16. Official Correspondence

Official Correspondence must be sent via postal mail to: Guy Carpenter & Company, LLC, 1166 Avenue of the Americas, New York, NY 10036, Attn: Legal Department.